Description
Correcteur de coma MPCC Mark III pour télescope Newton F/4. Idéal pour corriger les aberrations optiques des télescopes Newton à grande ouverture et grand champ. Ce correcteur ne crée aucune modification de la longueur focale de base du télescope. Assemblage T2 ou M48 avec coulant 50.8 mm.
Caractéristiques:
- Focale et champ non modifié
- Nouvelle combinaison optique avec absence de vignettage jusqu'àF/3.5
- Finesse des images dans tous le champ sans "hot spot" au centre de l'image
- Compatibilité d'assemblage T2 et M 48 (en retirant la bague d'arrêt)
- Bague d'arrêt 2" amovible pour réduire le backfocus
- Utilisation visuelle et photographique
- Simplicité d'utilisation
- Rapport qualité prix exceptionnel
- Traitements optiques optimisés pour une trasmission maximum avec absence de réflexion de l'UV au proche infra rouge.
- Adaptateur Canon EOS T2 sur option pour l'assemblage direct du MPCC III
- Ouverture diamètre 44 mm, champ entièrement couvert avec avec l'utilisation en M48 ( 2")
Baader MPCC Mark III - Multi Purpose Newton Coma Correktor
Coma corrector for Newton telescopes that neither reduces the focal length nor the image field of your telescope
The Multi-Purpose Coma Corrector Mark III eliminates coma across the full photographic field without manipulating the focal length. The proprietory lens design has our Phantom Group™ wideband multicoating on all air to glass surfaces. This treatment delivers the highest transmission combined with the lowest amount of scatter and reflections across a very wide spectral range from UV to NIR. The original MPCC had been designed for a f/ratio of f4.5 to f6. The new Mark III however works exceptionally well even down to f3.5. Stars remain pinpoints across the field and the visual use likewise is made much easier - with the help of the 2" (M48) male filter thread at the eyepiece facing side.
Photographic Application
The base-element 2858400A is prepared for use with a DSLR and a standard T-ring, it can be used over the T-2 thread on all standard T-rings. Since the T-thread vignettes with cameras with larger sensors (such as full-format DSLRs), the T-2 thread can be removed. Then an M48 thread is free, and the free aperture increases from 38 to 44 mm. The M48 spacer ring for MPCC III / Protective EOS T-ring can be connected directly to the Protective CANON DSLR T-ring.
This means that you do not only have sharp stars in the entire picture but also illuminate large sensors!
Visual and photographic application
In addition, the MPCC can be used both visually and photographically. The V-1 set # 2454803 contains the necessary adapters for most eyepieces or cameras with a 1.25 "socket - a detailed description can be found in the manual, which can be can be downloaded as a PDF under the tab "Downloads". The basic element of the MPCC can be upgraded at any time for visual use, all necessary parts are also available separately.
Technical data of MPCC Mark III
- no change in focal length or field size, an f4 Newtonian remains f4.
- calculated lens system - designed for an unvignetted field down to f3.5
- maximum sharpness across the field - without center soft spot (as reported of other)
- accepts T-2(M42x0.75) and/or 2"(M48x0.75) threaded photographic- or visual-adapters
- 2" stopping collar removable for an increase in back focus
- for photographic and visual use
- easy to use
- exceptional price/performance ratio
- Phantom Coating™ Group multicoated for maximum transmission and freedom from reflections from UV to NIR
- optional adapter for direct coupling of the MPCC III directly onto the Baader CANON EOS protective T-ring
- 44mm clear aperture when using the M48(2") filter-tread or the Protective T-ring with optional adapter
