Nous utilisons des cookies

Sur ce site Web, nous utilisons des cookies. Pour la navigation sur notre site Web, vous acceptez l'utilisation de cookies. Vous trouverez ici des informations supplémentaires sur la façon dont nous utilisons les cookies et dont vous pouvez modifier vos paramètres prédéfinis:

Baader 2" Port oculare coulant 50.8mm (T-2 part #17)

2408140
Porte oculaire coulant 50,8 mm pour SC C 6, C 9, C 11, C14, C8, serrage annulaire, fonction adaptateur 6x6
en stock: en stock
CHF 67.00

Description

Porte oculaire coulant 50,8 mm pour SC C 6, C 9, C 11, C14, C8, serrage annulaire, fonction adaptateur 6x6

 SCT visual back with 2" SC internal female thread but without 2" Filter holder

  • Precise 2" clamp with two large knurled locking screws and built-in spring bronze clamping ring holds the heaviest of accessories and is easy to operate even in the cold wearing gloves
  • Large field of view can be used alongside all 2" accessories such as 2" star diagonals and eyepieces
  • For all Schmidt Cassegrain telescopes, telescope side with 2 " internal female thread and retaining for 3.3" C14 connector nut

2" Deluxe eyepiece clamp for SC-telescope

Recommended in the version with filter-holder or 60mm extension incl. 2x filter holder

To the right, you see a short animation to our accessory, the Baader 2" DeLuxe eyepiece clamp in the version with 2" filter holder (#2958144) – to use on the 2" tube thread on most SC-telescopes. With the 3,3" Adapter (#2408145) you can also use it on C11 / C14 telescopes.

The 2" Deluxe eyepiece clamp consists in the base version of two parts. The eyepiece clamp and a factory-mounted inner thread ring, which reduces the native telescope sided M58 inner thread to a 2" inner thread. In the version SC-Deluxe eyepiece clamp with 2" filter holder(#2958144) the third part is a M48 filter holder. This filter holder must be threaded onto the 2" telescope-thread to hold any of our 2" filters.

When both parts are threaded onto any SC-telescope, the combo looks like our normal 2" Deluxe-clamp, but the performance is much better than any 2" SC-clamp on the market, since the customer may seal the optical tube from dust and moisture and may cut off the unwanted parts of the light for their application, like using a UV/IR-Filter to cut the infrared - or use a nebula filter UHC-S or O III - or any other filter.

The important difference is that our 2" filters are optically polished to not destroy or impair the wavefront of light and to retain perfect sharpness even under high magnification.

  1. C8-OTA w. regular Celestron VisualBack 1¼" attached
  2. 1¼" visual Back removed
  3. installing the 2" Filter-Holder onto the 2" Celestron end thread
  4. mounting any Baader 2" filter firmly onto the back end of any Celestron OTA
  5. threading the 2" eyepiece-clamp onto the 2" Filter-Holder

Options