Description
- Using real-time data, the controller provides just enough heat to prevent dew from forming, prolonging battery life
- “Smart Control” system monitors ambient temperature and humidity and adjusts power to four dew heaters automatically
- Compatible with Celestron Dew Heater Rings and third-party heating bands or straps (with thermistor accessory)
- Also provides power management for your entire setup with four 12V DC power output ports (one with variable voltage)
- Integrated USB 3.2 hub with three powered USB Type-A ports allows you to connect all your devices to your computer with only one cable
- Works with your Celestron telescope’s hand control or CPWI telescope control software so you can view data and make manual adjustments
- Mounts securely to your telescope's dovetail or tripod leg
- Durable metal housing features an integrated cooling fan to protect the controller’s electronics
| Dew Heater Ports: | 4x, ports, RCA jack, compatible with Celestron Dew Heater Rings and other 3rd party vendor heating straps |
| Thermistor ports: | 4x ports (one for each dew heater port), 2.5mm Audio jack, compatible with Celestron Dew Heater Rings and optional Celestron Thermistor |
| 12V DC power output port: | 3x ports, barrel connector jacks (5.5mm/2.1mm), 7A max for each port |
| Variable DC Power Output Port: | 3V-12V variable output, barrel connector jack (5.5mm/2.1mm), 5A max |
| USB Port: | 3x ports, USB 3.2 Type-A ports, up to 2.5A output for each |
| AUX ports: | 3x ports, allows connection to Celestron mounts for HC control, also allows connection of optional accessories |
| PC port: | USB 3.2 Type B, allows connection to PC for control with CPWI |
| 12V DC power input port: | Threaded barrel connector jack, 5.5mm/2.1mm, 10A max input |
| High current 12V DC power input port: | XT60 jack, 20A max input |
| Included power cable: | Cigarette lighter plug on one end, XT60 plug on another end, 10 ft. long, 20A fuse protected |
| Environmental sensor: | Measures ambient temperature and humidity, integrated into enclosure "bridge" to thermally isolate |
| Enclosure construction: | Aluminum with integrated fan |
| Clamp: | Fits CG-5 and CGE dovetails (also can be strapped onto tripod leg) |
| Electronic protections: | Fuse protected, reverse polarity protected, low voltage cut-off |
| Weight: | 1.4 lbs (635.02 g) |
| Dimensions: | 177.8mm x 114.3mm x 82.55mm (7" x 4.5" x 3.25") |
